MOUNTED ACCESS PLATFORMS
V Range
Designed for robustness and simplicity, with maximum payload.
IDEAL FOR MOST COMMON WORKING AT HEIGHT REQUIREMENTS
The V range is a great all-rounder, ideal for contractors:
- Offers more payload than any other platform type.
- Can be mounted to a variety of van models, giving you more van-preference.
- Robust articulating design with electro-hydraulic control and tried and tested electric safety interlock system.
- The articulating jib reaches around obstructions, which might otherwise prevent access to a target.
12.5m
7.2m-7.6m
200kg
360°
YOUR BENEFITS
Minimal maintenance
We use stainless pins and maintenance-free bushes, and our slew ring is inside the van for easy access.
Greater payload in the vehicle
Being roughly 100kg lighter than our telescopic platforms, the V-range is the lightest of our van mount platforms; giving you more payload for your equipment.
Fuel and CO2 saving
E-Drive – our unique, self-charging hybrid system, allows the engine to be off whilst operating your platform; you save on fuel costs and costly engine services.
Smoother, Faster, More Accurate Operation
Enjoy a smoother experience with millimetre accuracy due to our battery-powered E-Drive platform that is 25% faster than other brands.
Impressive uptime
Customers tell us our platforms are extremely reliable and we provide remote diagnostics should an issue arise.
| PLATFORM |  |
 |
 |
 |
 |
NOTES |
|---|---|---|---|---|---|---|
| V115 (Download Range Diagram) |
11.6m | 6.7m | 200kg | from 3.5t–7.2t |
Ford Transit Iveco Daily MAN TGE Mercedes Sprinter Renault Master VW Crafter |
1. Working height may vary by up to 0.3m depending on vehicle floor height. 2. Outreach dependent on basket load. |
| V125 (Download Range Diagram) |
12.5m | 7.2m–7.6m | ||||
| V140 (Download Range Diagram) |
14.3m | 8.3m |
- E-Drive – our self-charging hybrid electric system
- CAN bus control system with remote connectivity
- ‘Fit and forget’ bushes – no greasing required
- Operator feedback for fault diagnostics
- Ergonomic curved basket for greater space
- Insulated harness anchors for low voltage protection
- Auxiliary electric power pack in case of main pump failure
- Ground controller with 5m wander lead
- ...Other options on request
Call Now!
For further information or to arrange your demonstration
INSTRUCTIONS
• Click and drag (single finger swipe for mobile) will allow you to rotate the vehicle.
• Use your mouse wheel or pinch the screen (two fingers on mobile) to zoom in and out, and right click (two fingers on mobile) to move the vehicle up and down.
• Use the slider bars below to move the boom.
Slew (°)
Main Boom (°)
Jib (°)
RELIABILITY
Our V-range platforms are engineered for robustness, simplicity and all-round performance. The articulating platform design has electro-hydraulic controls and our proven electric safety interlock system. We use automotive-style wiring harnesses to ensure that cables are well protected at all points, and that switches and transducers are quick and simple to replace.
LOW MAINTENANCE
All boom pivots consist of chromed stainless pins run in ‘fit and forget’ polymer bearings. The only points on the system which require regular greasing are the stabilisers and the slew ring. These are all accessible from the ground, so there is never any need for working at height for routine maintenance.
DOWNLOAD V-RANGE DATA SHEET
customer testimonial
“Your platform is like a breath of fresh air. The best way to describe is like going from a model T Ford to a Rolls Royce.”
Ian Belton
Engineer, Openreach
Made in Britain
Aldercote is the leading UK manufacturer of vehicle-mounted access platforms. We are proud to design and manufacture high performance products that help our customers build and maintain the nation’s infrastructure.
Aldercote is a family run business that puts people first. We show this in our customer care and by valuing every employee for their passion, expertise and individuality.
